Loading... Please wait...


011414 - SIP-enabled Outdoor Video Intercom w/Keypad

Hover over image to zoom

  • Image 1
2.50 KGS
Calculated at checkout

 Product Description

The CyberData SIP-enabled Video Outdoor Intercom with Keypad is perfect for secure access settings requiring video and two-way communication. With excellent color and low light capability, the CyberData SIP-enabled Video intercom can increase the security of any VoIP installation.

The Weather Shroud can be purchased separately for even greater weather protection. Based on one of our most popular devices, the new Video Outdoor Intercom with Keypad can be installed in nursing care facilities, schools and universities, daycare facilities, retail establishments, highway tolls, needing color video and clear two way audio.


Supports SRST (Survivable Remote Site Telephony) in a Cisco environment
Streamlined case design
Optional Weather Shroud- for even greater weather protection
PoE 802.3af enabled (Powered-over-Ethernet)
12-key kepad with backlight
Programmable speed dial
SIP compliant
Adjustable camera angle
Adaptive full-duplex voice operation
Network web management and firmware download
Network adjustable speaker volume
Concurrent SIP and multicast paging
Dry relay contact for auxiliary control (controls external power)
Door closure and tamper alert signal
Downloadable alert, ringtones and callout messages


Ethernet I/F 10/100 Mbps
Protocol SIP RFC 3261 Compatible
Power Input PoE 802.3af compliant or +8 to +12VDC @ 1000mA Regulated Power Supply
Speaker Output 2 Watts Peak Power
On-Board Relay 1A at 30 VDC
Operating Temperature -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Audio Payload Types G711 A-Law and u-Law
SIP Video Payload Baseline profile @ 320x240
Dimensions Length: 7.480 inch [190 mm], Width: 2.284 inch [58 mm], Height: 5.118 inch [130 mm]
Video Lens Angle 72 degrees
Warranty 2 years limited
Weight / Boxed Weight 2.8 lbs. (1.27 kg) / 4.0 lbs. (1.81 kg)
Part Number 011414 (011188 Weather Shroud sold separately)
Note: Electronics are conformal coated for environmental protection



 Remote Switch Connection:

Connecting to non-inductive type loads (Devices less than 1A @ 30VDC)

This relay can be used to trigger low current devices like strobes and security camera input signals as long as the load is not an inductive type and the relay is limited to a maximum of 1A @ 30VDC.

Connecting to inductive type loads (Door Strike Intermediate Relay Module)

We highly recommend that inductive load and high current devices use our door strike intermediate relay module product (CD# 011269)

Connecting to inductive type loads (Networked Dual Door Strike Relay)

We highly recommend that inductive load and high current devices use our networked dual door strike relay module product (CD# 011375)

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's News


Follow us on

Copyright 2019 Digital Techniques. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter