Loading... Please wait...

Categories

011311 - Singlewire InformaCast® Office Ringer

Hover over image to zoom

  • Image 1
Cyberdata
$891.40
SKU:
11311
Weight:
1.00 KGS
Shipping:
Calculated at checkout

 Product Description

Now supporting Singlewire InformaCast® notification messaging as well as a true SIP endpoint, the Singlewire InformaCast® Office Ringer is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) notification device that easily connects into existing local area networks (LANs) with a single cable connection.

New Features

Features

  • InformaCast® compliant
  • InformaCast® resiliency protocol
  • Capable of receiving SingleWire Informacast, SIP and Multicast messages
  • Plays audio from Multicast
  • PoE 802.3af enabled (Power-over-Ethernet)
  • SIP compliant
  • Full-duplex voice operation
  • Now supports SRST (Survivable Remote Site Telephony) in a Cisco environment
  • Streamlined case design
  • Network web management and firmware download
  • Network adjustable speaker volume
  • Concurrent SIP and multicast paging
  • Dry relay contact for auxiliary control
  • Door closure and tamper alert signal
  • Downloadable alert, ringtones and callout messages

Specifications:

Ethernet I/F

10/100 Mbps

Protocol

SIP RFC 3261 Compatible and InformaCast v4.0 and later

Power Input

PoE 802.3af compliant or +8 to +12VDC @ 1000mA Regulated Power Supply

Speaker Output

2 Watts Peak Power

On-Board Relay

1A at 30 VDC

Operating Temperature

-10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)

Payload Types

G711 A-Law and u-Law, G.722

Dimensions

Length: 4.53 inches [115 mm], Width: 2.14 inches [54.3 mm], Height: 4.53 inches [115 mm]

Weight / Boxed Weight

1.0 lbs. (0.45 kg) / 2.0 lbs. (0.90 kg)

Compliance

CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant

Warranty

2 years limited

Part Number

011311

 

Installation:

Typical Installation:

 

 

Intercom to Auxiliary RGB Strobe Kit Connections:

 

 

Intercom to SIP RGB Strobe connections:

 

 

Connections:

 

 

Remote Switch Connections:

 

 

Connecting to non-inductive type loads (Devices less than 1A @ 30 VDC): This relay can be used to trigger low current devices like strobes and security camera input signals as long as the load is not an inductive type and the relay is limited to a maximum of 1A @ 30 VDC.

 

 

Connecting to inductive type loads (Door Strike Intermediate Relay Module): We highly recommend that inductive load and high current devices use our door strike intermediate relay module product (CD # 011269).

 

 

Connecting to inductive type loads (Networked Dual Door Strike Relay): We highly recommend that inductive load and high current devices use our networked dual door strike relay product (CD # 011375).

 

 

Wall Mounting:

 

 

Flush Mounting:

 

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Follow us on

Copyright 2018 Digital Techniques Australia. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter