Loading... Please wait...


011049 - SIP Call Button

Hover over image to zoom

  • Image 1
1.00 KGS
Calculated at checkout

 Product Description

The SIP Call Button is a Power over Ethernet (PoE 802.3af) device that can be mounted under a desk or in a discrete location. If an event takes place, the user depresses the button. The Call Button automatically makes a call to a pre-set phone or extension number. When the called number answers, the Call Button plays and repeats a stored audio file. This stored audio file is uploaded by the administrator to meet the needs to the installed location.


New Features


  • PoE 802.3af enabled (Power-over-Ethernet)
  • SIP compliant
  • Full-duplex voice operation
  • Now supports SRST (Survivable Remote Site Telephony) in a Cisco environment
  • Streamlined case design
  • Network web management and firmware download
  • Network adjustable speaker volume
  • Concurrent SIP and multicast paging
  • Dry relay contact for auxiliary control
  • Door closure and tamper alert signal
  • User downloadable message for 80 seconds
  • Single button call to preset number
  • Continuous repeat of message
  • Call progress light



Ethernet I/F

10/100 Mbps


SIP RFC 3261 Compatible

Power Input

PoE 802.3af compliant or +8 to +12VDC @ 1000mA Regulated Power Supply


CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant

On-Board Relay

1A at 30 VDC

Operating Temperature

-10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)

Payload Types

G711 A-Law, u-Law, G.722


Length: 4.53 inches [115 mm], Width: 1.58 inches [40.2 mm], Height: 4.53 inches [115 mm]

Weight/Box Weight

1.0 lbs. (0.45 kg) / 2.0 lbs. (0.90 kg)


2 Years Limited

Part Number



Typical Installation: Door Entry/Access Control

Typical Installation: SIP RGB Strobe or Auxiliary RGB Stroble:

Intercom to Auxiliary RGB Strobe Connections:

Intercom to SIP RGB Stobe Connections:


Remote Switch Connections:

Connecting to non-inductive type loads (Devices less than 1A @ 30 VDC): This relay can be used to trigger low current devices like strobes and security camera input signals as long as the load is not an inductive type and the relay is limited to a maximum of 1A @ 30 VDC.

Connecting to inductive type loads (Door Strike Intermediate Relay Module): We highly recommend that inductive load and high current devices use our door strike intermediate relay module product (CD # 011269).

Connecting to inductive type loads (Networked Dual Door Strike Relay): We highly recommend that inductive load and high current devices use our networked dual door strike relay product (CD # 011375).

Wall Mounting:


Flush Mounting:

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's News


Follow us on

Copyright 2019 Digital Techniques. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter